Sunday 14 December 2014

Burdastyle #114 10/2011


Wow I drafted this post weeks ago and have only just got around to posting it! I was hanging on to get some better photos, but lack of natural daylight and shortness of time has led me to post the original snap I took on my phone. The top doesn't quite look as it does in the photo as I made a couple of changes.

I bought a beautiful lightweight printed cotton from the market a few weeks ago. I spent a while going through my collection of burdastyle magazines looking for the perfect pattern to use it on.

I finally settled on #114 from October 2011. Which was the first issue I ever bought. The style is a classic blouse with pleat front and Peter Pan collar. It has a bound neck opening and long sleeves.mits also a sewing course with this issue.

I did make a few minor adjustments to the pattern.

Firstly I widened the sleeves at the hem, to create a slim bishop sleeve and finished this with a bias bound hem. No placket. This makes the sleeves much quicker to sew.

I then sewed up the pattern as per the rather scant instructions, the construction of the pleated section is rather strange and there could be a simpler and easier way to do this. I found the bound slit at the back to be rather bulky. To be fair I don't like bound slits and find a faced slit is easier to create and creates a better finish, this was my second alteration.

I also ended up redrafting the collar as the draft did not lie correctly. To begin with I made the curved edge more rounded. Then I started with the collar. If you have ever drafted a flat collar, you will know that you need to take out a wedge from the outside edge to prevent the collar sticking up at the shoulder seams. Taking out this wedge helps the collar fit around the neckline more naturally. 

I initially used the pattern as it was, but once it was basted in place I could see the problem. I cut a slit from the outside edge to almost the neckline and overlapped by 1.5 cm, which was the amount I pinned out on the first collar. I then smoothed the lines and recut the collar. Success. I finished the neckline edge with a bias facing and used a hook and eye closure to finished the neck slit.

I was also not happy with the pleats. they are secured in the pattern and my photo with a couple of sets of horizontal stitching. This resulted in some gaping. I ended up stitching the pleats in place and the result is much better. I'll try to get chance to post updated photos nect time I wear this top.

I'm really pleased with the final outcome even if it did take way longer than planned. I just wish the collar draft had been more accurate. 

LinkWithin

Related Posts Plugin for WordPress, Blogger...